Hip Piercing that you can see on the product picture is a so-called lippy loop – a mixture of a horseshoe and a labret. The lower part of Hip Piercing goes through the lip and has a 90-degree angle to the front, whereas jewelry with a slight curve would lie directly on the edge of your lips. The ends of this piece of jewelry are provided with 3 mm balls, each containing a sparkling stone. You can unscrew both balls, and if you have other balls with a 1.2 mm thread at home that you prefer, you can, of course, unscrew them too. Alternatively, you could order more loose balls in our shop hip Piercing in two sizes, where only the length makes the difference. One model has a diameter of 8 mm, and the other model has a diameter of 10 mm. Piercing was measured on the inside: starting from the lower, straight rod up to the arch. Similar to a horseshoe or ring. In the 8 mm model, the horizontal rod is 6 mm long, and in the 10 mm model, this rod is 8 mm long.
Hip Piercing can be used in any lip piercing. Whether a standard lip piercing or a snakebite, Hip Piercing always looks good.Piercing, a curved rod that is suitable for many piercings, as long as the dimensions match. Piercing was provided with an inside thread, which only means that the line sits in piercing- so that the balls are screwed into Hip Piercing and not the other way around (screw the balls onto the rod). Piercing has the advantage that the thread is hidden, and you also avoid the risk of getting a small crack in your Hip Piercing when you insert Piercing. Hip Piercing is 8 mm long and 1.2 mm thick. Perfect to be used as an eyebrow piercing. It can, of course, also be used for a vertical lip piercing. Because as I said before, it can be used almost anywhere, as long as the dimensions of the rod match your piercing. Piercing is available in two versions, where only the stone or the size makes the difference. Choose between 2 mm or 3 mm stones.